Place of Origin: China
Brand Name: YBT
Certification: CE ISO SGS
Model Number: YB983459
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Packaging Details: Standard export packing with each machine tied and protected in container
Delivery Time: 60-90 days
Payment Terms: T/T
Supply Ability: 10set
Tank Sheet Custom Roll Forming Machine Steel Silo Curving Corrugated
Silo Features1. The silo constructed with the steel silo making machine has optimal overall performance and long lifespan. The seaming thickness is 5 times the thickness of the base material. Apart from the strengthened load carrying capacity, the silo has the advantage of good stability and long lifespan over other product.
2. Optimal sealing performance and wide applications. Our cold roll forming line provides seaming with good airtightness. It helps prevent the granular and powdery grain stored being influenced by the humidity outside the silo. In addition, the silo constructed can satisfy the technological requirement for disinsection or fumigation. Application for storing liquid is also available.
3. Short construction period and low construction cost. It only takes about 5 days to construct the 1000 ton silo with our cold roll forming line. The silo weight is just one-sixth that of the cement silo. Therefore, the silo construction cost is reduced, accordingly.
4. Small land occupation, good adaptability and easy maintenance. The height and diameter of the spiral steel silo is selectable within a large range. The space between the silos can be less than 50m.
Technical Parameters of Cold Roll Forming Line
Steel coil width: from 1250 mm to 1500 mm;
Internal diameter of coil: variable, from 470 mm to 620 mm
Oil cylinder dia:120mmWorking speed: 0-15m/min adjustableMain motor power: 7.5KW AC motorHydraulic power: 5.5kwSpeed controlled by frequency converter brand: YaskawaDe-coiler should be with Loop control and hold down, and with baffle for forbid coil fall downThe decoiler has 4 segments
Material of the profile: 195-235Mpa GI or carbon steelThickness range: 3.0-4.0mmMaximum production speed: not less than 18 meters per minute (for non-perforated profiles, excluding cutting)Main motor power:60kw, AC motor, motor inside of main machine (Brand: Guomao of China)Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3PhaseRoll station:20 stationsRoller material:Gcr15 bearing material chrome plated surface with hardness 58-62 degree ,CNC,Shaft diameter: ￠150mm material: SAE1045 with quenching and temperingTransmission: by gear box 200*500(outside is cast iron, surface needed polish and paint. Inside is 60# forge and press metal)
The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating both punches and dolies should be easily replaceable without requiring disassembly of complete units.The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console.Hydraulic power: 5.5kwWorking pressure: 12-16Mpa
Machine adopt hydraulic cutting
Cutting after forming: Cut the sheet after roll forming to required lengthCutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.Material of blade: CR12with heat treatmentLength measuring: Automatic length measuringTolerance of length: 4700mm+/- 2mm
Hydraulic power: 11kWWorking pressure: 20-25Mpa adjustableSolenoid valve: 3 groupHydraulic oil: 46# hydraulic oilColor: Blue (or base on customer request)